SAND BLASTING

PROCESS

NOTE: to play any video from the below list – just click on any tabs:

DEEP

CLEANING IMPURITIES

WE ARE CURRENTLY UPGRADING AND ADDING FRESH NEW VIDEOS TO OUR ONLINE SYSTEM.

What is Sandblasting ?  Why, How & Where is needed?

Iron Malta Sandblasting Restoration Services in Malta.

Sandblast is a process that remove the following list .

  • Old Paint

  • Rust from Iron

  • Impurities

  • Unwanted Element

  • corrosion cleaning process

WHAT IS SANDBLASTING ?

Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by sand, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.

A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust. Sandblasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material.

.
Sandblast process – makes wrought iron more clean and refined

Definition of refined: without impurities and unwanted elements, will be removed in the  process.

Sandblast process – brings the material more smoother

Definition of smoother : having an even and regular surface; free from perceptible projections, lumps, or indentations.

Raw Wrought Iron – Not Sandblasting – Not Painted

Definition of Raw wrought iron : In it’s proper form, texture, iron material, the original color of wrought iron, during the manufacturing process

WHAT IS A TYPICAL SANDBLASTING PROCESS?

Sandblasting is the process of using compressed air to propel abrasive media at a surface to clean, (usually paint & rust),deburr, or to prepare a surface for a coating of some sort.

There are two kinds of sandblasters: Suction  Siphon” & Pressure Blast Systems. Pressure systems are ten times faster & much more effective, but also quite a bit more expensive.

There are two basic kinds of sand blasters: Blast Cabinets & Portable Blasters

There is a huge variety of abrasive blast media out there each has its purpose. One you want to stay away from is Silica Sand. Blasting with Silica sand causes Silicosis of the lungs…Do Not Ever Use It!!!

If you are looking to blast hand tools, such as saw blades, wrenches, etc., Id recommend blasting them in a sandblast cabinet. (A Suction/Siphon cabinet would probably be sufficient¦)

Sandblast Cabinets have adequate lighting, a dust collector, and two gloves you place you hands inside to blast within the cabinet. One nice part about blasting inside a cabinet is that all the dust is contained, so no respirator is needed. They are also relatively quiet, and some have abrasive separators which allow you to get the maximum life out of the abrasive blast media & consequently save money.

For cleaning – removing rust and corrosion, or even old layers of paint from wrought iron – metal – steel – works

Home improvement & remodeling service in Malta

Soft blasting can save your work and your old galvanizing. (if it’s not to late)

Services we offer:

Process: removing your old work – from site.

than we have a soft blasting treatment, that will save your old galvanizing.

than we re paint it with an undercoat protraction.

and finally spray painting finishing will be applied on your work and will look fresh like new.

and we will re fixing everything work onsite.

This service is ideal for balcony – balconies – railing – railings – fancies – stairs – staircase – handrails – banisters – gate – gates – doors -  windows – security grills – security guards – garage doors – garden and indoor furniture and much much more.

Sand blast – Sandblast – Grit blast – Shot blast – Soft blast – Abrasive blast . MALTA EUROPE EUROPEAN SYSTEM

Sandblasting – Sand blasting – Grit blasting – – Shot blasting – – Soft blasting – Abrasive blasting – MALTA EUROPE

CONTACT US INFORMATION

CONTACT US | INFORMATION

EMAIL ADDRESS TO USE: (regarding any other general information/help needed).

info@ironmalta.com

EMAIL ADDRESS TO USE: (regarding a quotation request – just add/attach the required information as listed below.

quotes@ironmalta.com

EMAIL ADDRESS TO USE:

(regarding any general information/help).

info@ironmalta.com

EMAIL ADDRESS TO USE:

(regarding a quotation request)

for an accurate & detailed quotation, view the Q&A (FAQ) TAB listed down below.

quotes@ironmalta.com

CONTACT NUMBER:

+35679604517

THE ABOVE CONTACT LINE IS REACHABLE ONLY, DURING OFFICE HOURS. 

SHOWROOM VIEWING & CONSULTATION BY APPOINTMENT ONLY

OFFICE HOURS:

MONDAY TO FRIDAY

9:00AM | 2:00PM

SHOWROOM VIEWING |  CONSULTATION BY APPOINTMENT ONLY

OFFICE HOURS: MONDAY TO FRIDAY

9:00AM TO 2:00PM

DUE TO ONSITE JOBS,

IDEALLY IS TO ALWAYS CALL

AND CONFIRM WE ARE ON PREMISES.